dmesg - NVIDIA GeForce GTX 660 Ti

Return To NVIDIA GeForce GTX 660 Ti System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-17-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.2-23ubuntu2) ) #27-Ubuntu SMP Sun Apr 7 19:39:35 UTC 2013 (Ubuntu 3.8.0-17.27-generic 3.8.6)
Command line: BOOT_IMAGE=/vmlinuz-3.8.0-17-generic root=/dev/mapper/Root-Root ro rootflags=subvol=@ quiet splash
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009ce3afff] usable
BIOS-e820: [mem 0x000000009ce3b000-0x000000009cf4bfff] ACPI NVS
BIOS-e820: [mem 0x000000009cf4c000-0x000000009d3abfff] reserved
BIOS-e820: [mem 0x000000009d3ac000-0x000000009d421fff] ACPI data
BIOS-e820: [mem 0x000000009d422000-0x000000009d428fff] reserved
BIOS-e820: [mem 0x000000009d429000-0x000000009d429fff] ACPI NVS
BIOS-e820: [mem 0x000000009d42a000-0x000000009d43afff] reserved
BIOS-e820: [mem 0x000000009d43b000-0x000000009d43dfff] ACPI NVS
BIOS-e820: [mem 0x000000009d43e000-0x000000009d4b3fff] reserved
BIOS-e820: [mem 0x000000009d4b4000-0x000000009d4b4fff] usable
BIOS-e820: [mem 0x000000009d4b5000-0x000000009d4b5fff] ACPI NVS
BIOS-e820: [mem 0x000000009d4b6000-0x000000009d4bbfff] reserved
BIOS-e820: [mem 0x000000009d4bc000-0x000000009d4c3fff] ACPI NVS
BIOS-e820: [mem 0x000000009d4c4000-0x000000009d4eafff] reserved
BIOS-e820: [mem 0x000000009d4eb000-0x000000009d56dfff] ACPI NVS
BIOS-e820: [mem 0x000000009d56e000-0x000000009d7fffff] usable
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000085fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7737/Big Bang-XPower II (MS-7737), BIOS V1.5 10/16/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x860000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FF800000000 write-back
  1 base 000800000000 mask 3FFFC0000000 write-back
  2 base 000840000000 mask 3FFFE0000000 write-back
  3 base 00009E000000 mask 3FFFFE000000 uncachable
  4 base 0000A0000000 mask 3FFFE0000000 uncachable
  5 base 0000C0000000 mask 3FFFC0000000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 1GB, type WB
reg 2, base: 33GB, range: 512MB, type WB
reg 3, base: 2528MB, range: 32MB, type UC
reg 4, base: 2560MB, range: 512MB, type UC
reg 5, base: 3GB, range: 1GB, type UC
total RAM covered: 32736M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 8  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2528MB, range: 32MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 1GB, type WB
reg 7, base: 33GB, range: 512MB, type WB
e820: update [mem 0x9e000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9d800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd00-0x000fcd0f] mapped at [ffff8800000fcd00]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x9d7fffff]
 [mem 0x00000000-0x7fffffff] page 1G
 [mem 0x80000000-0x9d7fffff] page 2M
kernel direct mapping tables up to 0x9d7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x85fffffff]
 [mem 0x100000000-0x83fffffff] page 1G
 [mem 0x840000000-0x85fffffff] page 2M
kernel direct mapping tables up to 0x85fffffff @ [mem 0x9d7fe000-0x9d7fffff]
RAMDISK: [mem 0x35f8a000-0x36fbcfff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 000000009d3ac080 0007C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 000000009d3b32c0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 000000009d3ac188 07135 (v02 ALASKA    A M I 00000007 INTL 20051117)
ACPI: FACS 000000009d4c1f80 00040
ACPI: APIC 000000009d3b33b8 000BE (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 000000009d3b3478 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: MSDM 000000009d3b34b8 00055 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: HPET 000000009d3b3510 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
ACPI: SSDT 000000009d3b3548 6E144 (v02  INTEL    CpuPm 00004000 INTL 20051117)
ACPI: DMAR 000000009d421690 000BC (v01 A M I   OEMDMAR 00000001 INTL 00000001)
ACPI: EINJ 000000009d421750 00130 (v01    AMI AMI EINJ 00000000      00000000)
ACPI: ERST 000000009d421880 00210 (v01  AMIER AMI ERST 00000000      00000000)
ACPI: HEST 000000009d421a90 000A8 (v01    AMI AMI HEST 00000000      00000000)
ACPI: BERT 000000009d421b38 00030 (v01    AMI AMI BERT 00000000      00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000085fffffff]
Initmem setup node 0 [mem 0x00000000-0x85fffffff]
  NODE_DATA [mem 0x85fffb000-0x85fffffff]
 [ffffea0000000000-ffffea00217fffff] PMD -> [ffff88083f600000-ffff88085f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x85fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009afff]
  node   0: [mem 0x00100000-0x9ce3afff]
  node   0: [mem 0x9d4b4000-0x9d4b4fff]
  node   0: [mem 0x9d56e000-0x9d7fffff]
  node   0: [mem 0x100000000-0x85fffffff]
On node 0 totalpages: 8376409
  DMA zone: 64 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3909 pages, LIFO batch:0
  DMA32 zone: 9988 pages used for memmap
  DMA32 zone: 629194 pages, LIFO batch:31
  Normal zone: 120832 pages used for memmap
  Normal zone: 7612416 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000009ce3b000 - 000000009cf4c000
PM: Registered nosave memory: 000000009cf4c000 - 000000009d3ac000
PM: Registered nosave memory: 000000009d3ac000 - 000000009d422000
PM: Registered nosave memory: 000000009d422000 - 000000009d429000
PM: Registered nosave memory: 000000009d429000 - 000000009d42a000
PM: Registered nosave memory: 000000009d42a000 - 000000009d43b000
PM: Registered nosave memory: 000000009d43b000 - 000000009d43e000
PM: Registered nosave memory: 000000009d43e000 - 000000009d4b4000
PM: Registered nosave memory: 000000009d4b5000 - 000000009d4b6000
PM: Registered nosave memory: 000000009d4b6000 - 000000009d4bc000
PM: Registered nosave memory: 000000009d4bc000 - 000000009d4c4000
PM: Registered nosave memory: 000000009d4c4000 - 000000009d4eb000
PM: Registered nosave memory: 000000009d4eb000 - 000000009d56e000
PM: Registered nosave memory: 000000009d800000 - 00000000b0000000
PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88085fc00000 s85056 r8192 d21440 u131072
pcpu-alloc: s85056 r8192 d21440 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8245519
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-17-generic root=/dev/mapper/Root-Root ro rootflags=subvol=@ quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32881524k/35127296k available (7006k kernel code, 1621660k absent, 624112k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
NR_IRQS:16640 nr_irqs:1184 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3200.229 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.45 BogoMIPS (lpj=12800916)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26688 entries in 105 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000f4ffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr f4ffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x0000009d43e000 end: 0x0000009d45dfff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000f4ffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base  0xf4ffc000 IOMMU 0
IOAPIC id 2 under DRHD base  0xf4ffc000 IOMMU 0
HPET id 0 under DRHD base 0xf4ffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 OK
Brought up 12 CPUs
smpboot: Total of 12 processors activated (76805.49 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9ce3b000-0x9cf4bfff] (1118208 bytes)
PM: Registering ACPI NVS region [mem 0x9d429000-0x9d429fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x9d43b000-0x9d43dfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0x9d4b5000-0x9d4b5fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x9d4bc000-0x9d4c3fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0x9d4eb000-0x9d56dfff] (536576 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
pci_root PNP0A08:00: ACPI _OSC control (0x14) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xac000000-0xf7ffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 10: [mem 0xf494a000-0xf494afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf4949000-0xf494900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xf4900000-0xf491ffff]
pci 0000:00:19.0: reg 14: [mem 0xf4948000-0xf4948fff]
pci 0000:00:19.0: reg 18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf4947000-0xf49473ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf4920000-0xf4923fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf4946000-0xf49463ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf4945000-0xf49457ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf4944000-0xf49440ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:1183] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xf3000000-0xf3ffffff]
pci 0000:03:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io  0xe000-0xe07f]
pci 0000:03:00.0: reg 30: [mem 0xf4000000-0xf407ffff pref]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 10: [mem 0xf4080000-0xf4083fff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xf3000000-0xf40fffff]
pci 0000:00:03.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10b5:8608] type 01 class 0x060400
pci 0000:06:00.0: reg 10: [mem 0xf4300000-0xf431ffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 06-0e]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xbfff]
pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf43fffff]
pci 0000:07:01.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:04.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
pci 0000:07:05.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
pci 0000:07:06.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
pci 0000:07:07.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
pci 0000:07:08.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
pci 0000:07:09.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-0e]
pci 0000:06:00.0:   bridge window [io  0xa000-0xbfff]
pci 0000:06:00.0:   bridge window [mem 0xf4100000-0xf42fffff]
pci 0000:08:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:08:00.0: reg 10: [mem 0xf4200000-0xf42007ff 64bit]
pci 0000:08:00.0: reg 18: [io  0xb000-0xb0ff]
pci 0000:08:00.0: supports D2
pci 0000:08:00.0: PME# supported from D2 D3hot D3cold
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:07:01.0:   bridge window [mem 0xf4200000-0xf42fffff]
pci 0000:07:04.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:0a:00.0: reg 10: [mem 0xf4100000-0xf411ffff]
pci 0000:0a:00.0: reg 18: [io  0xa000-0xa01f]
pci 0000:0a:00.0: reg 1c: [mem 0xf4120000-0xf4123fff]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:05.0: PCI bridge to [bus 0a]
pci 0000:07:05.0:   bridge window [io  0xa000-0xafff]
pci 0000:07:05.0:   bridge window [mem 0xf4100000-0xf41fffff]
pci 0000:07:06.0: PCI bridge to [bus 0b]
pci 0000:07:07.0: PCI bridge to [bus 0c]
pci 0000:07:08.0: PCI bridge to [bus 0d]
pci 0000:07:09.0: PCI bridge to [bus 0e]
pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 10: [mem 0xf4800000-0xf4801fff 64bit]
pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 0f]
pci 0000:00:1c.1:   bridge window [mem 0xf4800000-0xf48fffff]
pci 0000:10:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:10:00.0: reg 10: [io  0xd050-0xd057]
pci 0000:10:00.0: reg 14: [io  0xd040-0xd043]
pci 0000:10:00.0: reg 18: [io  0xd030-0xd037]
pci 0000:10:00.0: reg 1c: [io  0xd020-0xd023]
pci 0000:10:00.0: reg 20: [io  0xd000-0xd01f]
pci 0000:10:00.0: reg 24: [mem 0xf4700000-0xf47001ff]
pci 0000:00:1c.2: PCI bridge to [bus 10]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xf4700000-0xf47fffff]
pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:11:00.0: reg 10: [mem 0xf4600000-0xf4601fff 64bit]
pci 0000:11:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 11]
pci 0000:00:1c.4:   bridge window [mem 0xf4600000-0xf46fffff]
pci 0000:12:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:12:00.0: reg 10: [io  0xc050-0xc057]
pci 0000:12:00.0: reg 14: [io  0xc040-0xc043]
pci 0000:12:00.0: reg 18: [io  0xc030-0xc037]
pci 0000:12:00.0: reg 1c: [io  0xc020-0xc023]
pci 0000:12:00.0: reg 20: [io  0xc000-0xc01f]
pci 0000:12:00.0: reg 24: [mem 0xf4500000-0xf45001ff]
pci 0000:00:1c.5: PCI bridge to [bus 12]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xf4500000-0xf45fffff]
pci 0000:13:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:13:00.0: reg 10: [mem 0xf4400000-0xf4401fff 64bit]
pci 0000:13:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 13]
pci 0000:00:1c.7:   bridge window [mem 0xf4400000-0xf44fffff]
pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xac000000-0xf7ffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9ce3b000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d4b5000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d800000-0x9fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xf4fff000-0xf4ffffff] has been reserved
system 00:00: [mem 0xfbfff000-0xfbffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xf4ffc000-0xf4ffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: [io  0x0400-0x0453] has been reserved
system 00:08: [io  0x0458-0x047f] has been reserved
system 00:08: [io  0x1180-0x119f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xf3000000-0xf40fffff]
pci 0000:00:03.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:07:01.0:   bridge window [mem 0xf4200000-0xf42fffff]
pci 0000:07:04.0: PCI bridge to [bus 09]
pci 0000:07:05.0: PCI bridge to [bus 0a]
pci 0000:07:05.0:   bridge window [io  0xa000-0xafff]
pci 0000:07:05.0:   bridge window [mem 0xf4100000-0xf41fffff]
pci 0000:07:06.0: PCI bridge to [bus 0b]
pci 0000:07:07.0: PCI bridge to [bus 0c]
pci 0000:07:08.0: PCI bridge to [bus 0d]
pci 0000:07:09.0: PCI bridge to [bus 0e]
pci 0000:06:00.0: PCI bridge to [bus 07-0e]
pci 0000:06:00.0:   bridge window [io  0xa000-0xbfff]
pci 0000:06:00.0:   bridge window [mem 0xf4100000-0xf42fffff]
pci 0000:00:1c.0: PCI bridge to [bus 06-0e]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xbfff]
pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf43fffff]
pci 0000:00:1c.1: PCI bridge to [bus 0f]
pci 0000:00:1c.1:   bridge window [mem 0xf4800000-0xf48fffff]
pci 0000:00:1c.2: PCI bridge to [bus 10]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xf4700000-0xf47fffff]
pci 0000:00:1c.4: PCI bridge to [bus 11]
pci 0000:00:1c.4:   bridge window [mem 0xf4600000-0xf46fffff]
pci 0000:00:1c.5: PCI bridge to [bus 12]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xf4500000-0xf45fffff]
pci 0000:00:1c.7: PCI bridge to [bus 13]
pci 0000:00:1c.7:   bridge window [mem 0xf4400000-0xf44fffff]
pci 0000:00:1e.0: PCI bridge to [bus 14]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xac000000-0xf7ffffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf40fffff]
pci_bus 0000:03: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xa000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf4100000-0xf43fffff]
pci_bus 0000:07: resource 0 [io  0xa000-0xbfff]
pci_bus 0000:07: resource 1 [mem 0xf4100000-0xf42fffff]
pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xf4200000-0xf42fffff]
pci_bus 0000:0a: resource 0 [io  0xa000-0xafff]
pci_bus 0000:0a: resource 1 [mem 0xf4100000-0xf41fffff]
pci_bus 0000:0f: resource 1 [mem 0xf4800000-0xf48fffff]
pci_bus 0000:10: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:10: resource 1 [mem 0xf4700000-0xf47fffff]
pci_bus 0000:11: resource 1 [mem 0xf4600000-0xf46fffff]
pci_bus 0000:12: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:12: resource 1 [mem 0xf4500000-0xf45fffff]
pci_bus 0000:13: resource 1 [mem 0xf4400000-0xf44fffff]
pci_bus 0000:14: resource 4 [io  0x0000-0x03af]
pci_bus 0000:14: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:14: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:14: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:14: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:14: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:14: resource 10 [mem 0xac000000-0xf7ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16588k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x98e3b000-0x9ce3b000] (64MB) mapped at [ffff880098e3b000-ffff88009ce3afff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1365586194.600:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:03.2: irq 68 for MSI/MSI-X
pcieport 0000:00:11.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 72 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 73 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 74 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 75 for MSI/MSI-X
pcieport 0000:06:00.0: irq 76 for MSI/MSI-X
pcieport 0000:07:01.0: irq 77 for MSI/MSI-X
pcieport 0000:07:04.0: irq 78 for MSI/MSI-X
pcieport 0000:07:05.0: irq 79 for MSI/MSI-X
pcieport 0000:07:06.0: irq 80 for MSI/MSI-X
pcieport 0000:07:07.0: irq 81 for MSI/MSI-X
pcieport 0000:07:08.0: irq 82 for MSI/MSI-X
pcieport 0000:07:09.0: irq 83 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:05.0: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:06.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:07.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:08.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:09.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:10:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:11:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:12:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:13:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ERST: Can not request iomem region  for ERST.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf4947000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-17-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4946000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-17-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0f:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 89 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 90 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 91 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-17-generic xhci_hcd
usb usb3: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-17-generic xhci_hcd
usb usb4: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:11:00.0: xHCI Host Controller
xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:11:00.0: irq 92 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 93 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 94 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 95 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 96 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 97 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 98 for MSI/MSI-X
xhci_hcd 0000:11:00.0: irq 99 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-17-generic xhci_hcd
usb usb5: SerialNumber: 0000:11:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:11:00.0: xHCI Host Controller
xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-17-generic xhci_hcd
usb usb6: SerialNumber: 0000:11:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:13:00.0: xHCI Host Controller
xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:13:00.0: irq 100 for MSI/MSI-X
xhci_hcd 0000:13:00.0: irq 101 for MSI/MSI-X
xhci_hcd 0000:13:00.0: irq 102 for MSI/MSI-X
xhci_hcd 0000:13:00.0: irq 103 for MSI/MSI-X
xhci_hcd 0000:13:00.0: irq 104 for MSI/MSI-X
xhci_hcd 0000:13:00.0: irq 105 for MSI/MSI-X
xhci_hcd 0000:13:00.0: irq 106 for MSI/MSI-X
xhci_hcd 0000:13:00.0: irq 107 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-17-generic xhci_hcd
usb usb7: SerialNumber: 0000:13:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:13:00.0: xHCI Host Controller
xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 8
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-17-generic xhci_hcd
usb usb8: SerialNumber: 0000:13:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fba23be0b6d0b6b43c18ed236500fc0285f0784c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-04-10 09:29:55 UTC (1365586195)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[148]: starting version 175
Disabling lock debugging due to kernel taint
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 108 for MSI/MSI-X
firewire_ohci 0000:08:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:3d:7e:26:f0:bd
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:0a:00.0: Disabling ASPM L0s L1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 109 for MSI/MSI-X
e1000e 0000:0a:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems apst 
e1000e 0000:0a:00.0: irq 110 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:0a:00.0: irq 111 for MSI/MSI-X
e1000e 0000:0a:00.0: irq 112 for MSI/MSI-X
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf4945000 port 0xf4945100 irq 109
ata2: SATA max UDMA/133 abar m2048@0xf4945000 port 0xf4945180 irq 109
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:10:00.0: irq 113 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:10:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:10:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf4700000 port 0xf4700100 irq 113
ata8: SATA max UDMA/133 abar m512@0xf4700000 port 0xf4700180 irq 113
ahci 0000:12:00.0: irq 114 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:12:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:12:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xf4500000 port 0xf4500100 irq 114
ata10: SATA max UDMA/133 abar m512@0xf4500000 port 0xf4500180 irq 114
e1000e 0000:0a:00.0 eth1: (PCI Express:2.5GT/s:Width x1) d4:3d:7e:26:f0:bc
e1000e 0000:0a:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:0a:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
firewire_core 0000:08:00.0: created device fw0: GUID 0010dc0001d343d6, S400
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 840  DXM0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
 sda: sda1 sda2
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
bio: create slab  at 1
Btrfs loaded
device fsid b448430c-5bf6-4832-b584-6645d09142af devid 1 transid 2879 /dev/dm-0
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=1a40, idProduct=0101
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB 2.0 Hub
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-8: ST32000641AS, CC13, max UDMA/133
ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
ata7.00: ATA-8: Corsair Force GT, 1.3.3, max UDMA/133
ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access     ATA      Corsair Force GT 1.3. PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3
sd 6:0:0:0: [sdc] Attached SCSI disk
usb 5-2: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3199.938 MHz
Switching to clocksource tsc
usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB Receiver
usb 5-2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:11:00.0-2/input2
input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1c.4/0000:11:00.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/input/input2
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:11:00.0-2:1
usb 7-2: new full-speed USB device number 2 using xhci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=0a29
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-2: Product: Logitech Wireless Headset
usb 7-2: Manufacturer: Logitech
usb 7-2: SerialNumber: 000D44B3099A
input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:1c.7/0000:13:00.0/usb7/7-2/7-2:1.3/input/input3
hid-generic 0003:046D:0A29.0005: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:13:00.0-2/input3
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-1.5: new low-speed USB device number 3 using ehci-pci
ata8.00: ATA-8: Hitachi HDS724040ALE640, MJAOA3B0, max UDMA/133
ata8.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access     ATA      Hitachi HDS72404 MJAO PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 7:0:0:0: [sdd] 4096-byte physical blocks
scsi 8:0:0:0: Direct-Access     ATA      ST32000641AS     CC13 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 8:0:0:0: [sde] Write Protect is off
sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1 sde2
sd 8:0:0:0: [sde] Attached SCSI disk
 sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI disk
usb 1-1.5: New USB device found, idVendor=046d, idProduct=c31c
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Keyboard
usb 1-1.5: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input4
hid-generic 0003:046D:C31C.0006: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.5/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input5
hid-generic 0003:046D:C31C.0007: input,hidraw4: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.5/input1
usb 1-1.6: new high-speed USB device number 4 using ehci-pci
usb 1-1.6: New USB device found, idVendor=046d, idProduct=0825
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-1.6: SerialNumber: 29B1A520
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10.00: ATA-8: WDC WD10EZEX-08RKKA0, 80.00A80, max UDMA/100
ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata10.00: configured for UDMA/100
scsi 9:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08R 80.0 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg5 type 0
sd 9:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 9:0:0:0: [sdf] 4096-byte physical blocks
sd 9:0:0:0: [sdf] Write Protect is off
sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdf: unknown partition table
sd 9:0:0:0: [sdf] Attached SCSI disk
usb 5-1.4: new high-speed USB device number 4 using xhci_hcd
usb 5-1.4: New USB device found, idVendor=058f, idProduct=6362
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.4: Product: Mass Storage Device
usb 5-1.4: Manufacturer: Generic
usb 5-1.4: SerialNumber: 058F312D81B
Initializing USB Mass Storage driver...
scsi10 : usb-storage 5-1.4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device fsid b448430c-5bf6-4832-b584-6645d09142af devid 1 transid 2879 /dev/mapper/Root-Root
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
bio: create slab  at 2
Adding 18874364k swap on /dev/sdc3.  Priority:-1 extents:1 across:18874364k SS
btrfs: disk space caching is enabled
scsi 10:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
scsi 10:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
scsi 10:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi 10:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg6 type 0
sd 10:0:0:1: Attached scsi generic sg7 type 0
sd 10:0:0:2: Attached scsi generic sg8 type 0
sd 10:0:0:3: Attached scsi generic sg9 type 0
sd 10:0:0:0: [sdg] Attached SCSI removable disk
sd 10:0:0:1: [sdh] Attached SCSI removable disk
sd 10:0:0:2: [sdi] Attached SCSI removable disk
sd 10:0:0:3: [sdj] Attached SCSI removable disk
btrfs: unlinked 332 orphans
btrfs: unlinked 42 orphans
btrfs: truncated 2 orphans
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[766]: starting version 175
device fsid b448430c-5bf6-4832-b584-6645d09142af devid 1 transid 2882 /dev/mapper/Root-Root
lp: driver loaded but no devices found
device label Root devid 1 transid 2386925 /dev/sdc1
btrfs: disk space caching is enabled
wmi: Mapper loaded
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 115 for MSI/MSI-X
nvidia: module license 'NVIDIA' taints kernel.
snd_hda_intel 0000:00:1b.0: irq 116 for MSI/MSI-X
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  313.26  Wed Feb 27 13:04:31 PST 2013
Linux video capture interface: v2.00
Btrfs detected SSD devices, enabling SSD mode
type=1400 audit(1365586198.583:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=931 comm="apparmor_parser"
type=1400 audit(1365586198.583:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=931 comm="apparmor_parser"
type=1400 audit(1365586198.583:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=931 comm="apparmor_parser"
type=1400 audit(1365586198.583:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=952 comm="apparmor_parser"
type=1400 audit(1365586198.583:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=952 comm="apparmor_parser"
type=1400 audit(1365586198.583:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=952 comm="apparmor_parser"
uvcvideo: Found UVC 1.00 device  (046d:0825)
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x70b
2:1:1 : no or invalid class specific endpoint descriptor
2:2:1 : no or invalid class specific endpoint descriptor
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x70b
btrfs: open /dev/dm-3 failed
btrfs: open /dev/dm-4 failed
btrfs: open /dev/dm-5 failed
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU8 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU9 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU10 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU11 sig=0x206d7, pf=0x4, revision=0x70b
device fsid b448430c-5bf6-4832-b584-6645d09142af devid 1 transid 2882 /dev/dm-0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
btrfs: open /dev/dm-2 failed
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input18
btrfs: open /dev/dm-1 failed
btrfs: open /dev/dm-6 failed
4:3:2: cannot set freq 24000 to ep 0x86
usbcore: registered new interface driver snd-usb-audio
btrfs: open /dev/dm-1 failed
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
init: udev-fallback-graphics main process (1369) terminated with status 1
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
btrfs: open /dev/dm-2 failed
btrfs: open /dev/dm-6 failed
btrfs: open /dev/dm-6 failed
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1424) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-cups-reload main process (1517) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM socket layer initialized
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
type=1400 audit(1365586205.375:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1552 comm="apparmor_parser"
type=1400 audit(1365586205.375:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1552 comm="apparmor_parser"
type=1400 audit(1365586205.375:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1552 comm="apparmor_parser"
type=1400 audit(1365586205.379:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1558 comm="apparmor_parser"
type=1400 audit(1365586205.379:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1549 comm="apparmor_parser"
type=1400 audit(1365586205.379:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1551 comm="apparmor_parser"
type=1400 audit(1365586205.379:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1549 comm="apparmor_parser"
type=1400 audit(1365586205.379:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1551 comm="apparmor_parser"
type=1400 audit(1365586205.379:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1550 comm="apparmor_parser"
type=1400 audit(1365586205.379:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1550 comm="apparmor_parser"
lp0: using parport0 (polling).
e1000e 0000:00:19.0: irq 108 for MSI/MSI-X
e1000e 0000:00:19.0: irq 108 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
systemd-logind[3092]: New seat seat0.
systemd-logind[3092]: Failed to save seat data for seat0: No such file or directory
show_signal_msg: 39 callbacks suppressed
pool[4732]: segfault at dc84 ip 00007ff81cd8eb40 sp 00007ff7b9957a00 error 4 in libgobject-2.0.so.0.3600.0[7ff81cd5d000+4d000]
NVRM: GPU at 0000:03:00: GPU-2b8657e9-a684-22e9-45b5-1c13c6fa59c3
NVRM: Xid (0000:03:00): 31, Ch 00000004, engmask 00000101, intr 10000000
geary[7622]: segfault at dc8d ip 00007fc75d5cf955 sp 00007fff7e872930 error 6 in libgobject-2.0.so.0.3600.0[7fc75d5af000+4d000]
systemd-hostnamed[24763]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
geary[23544]: segfault at dcb0 ip 00007fc7ceee3320 sp 00007fffb7a62810 error 6 in libgobject-2.0.so.0.3600.0[7fc7ceec3000+4d000]
prey.x86[15583]: segfault at 45b7051b ip 00000000f751eb17 sp 00000000e9823b80 error 4 in libgcc_s.so.1[f751b000+7000]

Return To NVIDIA GeForce GTX 660 Ti System Information